Hot melt mesh is a highly demanding adhesive for composite applications. Hot melt mesh is in great demand in the industry. However, as a high-viscosity high-tech material, we must first understand the characteristics of the hot-melt mesh. It is more appropriate to buy this product. Therefore, we will be more handy when using it. This article will introduce some knowledge of the use of hot melt mesh in various industries.
1. Shoe material field: It is necessary to press the hot-melt mesh film on the surface of the material according to the material used in the model shoes, and then use the high-temperature compounding equipment to press the hot-melt adhesive film to the material surface, and wait for it to dry completely. The filmed release liner can then be fired at high temperature and pressure onto a mesh or other fabric surface: this method is called a seamless adhesive upper; this seamless fit can be applied to all seamless sneakers, but for Different materials and process requirements, we need to choose the corresponding hot-melt mesh film according to our own requirements. Can be used in batches.
2. Apparel field: According to the size requirements of the fabric to be adhered, the user first cuts the hot-melt mesh film to the corresponding width, and uses the hot-melt adhesive film that is pressed at high temperature to be attached to the fabric. the surface of the fabric. After drying, tear off the release paper of the adhesive film, and then perform high-temperature pressure bonding according to the process requirements. This method is called hot-hot seamless bonding; the clothing is bonded with hot-melt adhesive film, which is suitable for many and complex fabrics. Due to the complexity of the process requirements, the user needs to conduct proofing and testing before mass production where applicable.
3. The field of luggage and luggage: it is necessary to paste the hot-melt mesh film on the surface of the material according to the material used for the luggage or luggage, and then paste the hot-melt mesh film on the surface of the material through high-temperature composite equipment, and then punch according to the process requirements. Or slitting, and then remove the film after curing. Form paper, which is pressed on the surface of the self-adhesive material at high temperature; there are various materials for leather cases or bags. When the hot-melt mesh film is suitable for bonding, it is necessary to select the film with the corresponding melting point according to the temperature resistance and folding resistance of the material used; and produce it according to the process requirements after the next batch of testing.
