Knowledge

Home/Knowledge/Details

Performance of Hot Melt Yarn at Different Temperatures

1. In a Low - Temperature Environment

1.1 Stable Physical State

 

At temperatures much lower than its melting point, hot melt yarn generally remains in a solid state with relatively stable physical properties. Its fiber morphology does not change, and it can maintain its original mechanical properties such as strength and elasticity. For example, at normal room temperature (usually 15 - 30°C), it can be stored, transported, and processed in textile manufacturing like ordinary yarn.

 

1.2 Unchanged Chemical Properties

 

From a chemical perspective, the chemical bonds of hot melt yarn are relatively stable in a low - temperature environment. It will not undergo chemical reactions such as oxidation and decomposition due to temperature. This enables it to maintain its chemical composition for a long time without deterioration.

Hot Melt Yarns

2. When Approaching the Melting Point Temperature

2.1 Softening Begins

 

As the temperature gradually approaches the melting point of hot melt yarn, it starts to soften. This is a gradual process, and the specific softening temperature varies depending on factors such as the composition and manufacturing process of the hot melt yarn. For example, for common polyester hot melt yarn, it gradually loses its original rigidity when approaching 250 - 260°C. At this stage, the friction between its fibers decreases, and the processability of the yarn is enhanced. For example, in some processes that require shaping or bonding of the yarn, this characteristic can be utilized.

 

2.2 Initial Adhesiveness

 

With the occurrence of softening, the adhesiveness of hot melt yarn begins to appear. It can adhere to the surface of other materials it comes into contact with, and this adhesive strength will increase as the temperature further rises. This property makes hot melt yarn useful in the textile industry for fabric bonding, such as in the production of composite fabrics or the bonding of clothing linings.

 

3. When Reaching the Melting Point and Above

3.1 Complete Melting

 

Once the temperature reaches the melting point of hot melt yarn, it changes from a solid state to a liquid state. This is a phase transition process. For example, the melting point of some polyethylene hot melt yarn is around 130°C. When this temperature is reached, it will flow like a liquid. In this state, hot melt yarn can fully fill the gaps between the materials to be bonded, achieving a good bonding effect.

 

3.2 Fluidity and Wetting Ability

 

The melted hot melt yarn has good fluidity and wetting ability. It can evenly distribute on the surface of the bonded materials under appropriate pressure, binding them tightly together like glue. At the same time, this fluidity also enables it to adapt to materials with different shapes and surface roughness, ensuring the integrity of the bond.

 

3.3 Bonding and Solidification after Cooling

 

When the temperature decreases, the melted hot melt yarn will solidify again. During this process, it will form a firm bond, adhering the previously contacted materials together. For example, in the production of non - woven fabrics, hot melt yarn is heated and melted, distributed among the fibers, and then cooled and solidified, giving the non - woven fabric a certain strength and structural stability.

 

4. In a High - Temperature Environment (Exceeding the Service Limit Temperature)

4.1 Performance Degradation or Even Decomposition

 

If the temperature continues to rise and exceeds the normal service limit temperature of hot melt yarn, its performance will deteriorate sharply. Fibers may become brittle and strength may decrease. For some hot melt yarns that are not heat - resistant, decomposition reactions may occur at excessive temperatures, releasing harmful gases or changing their chemical composition, resulting in the loss of their original functions.

 

4.2 Impact on Surrounding Materials

 

In such a high - temperature environment, hot melt yarn not only suffers from damaged performance but may also have an adverse effect on other materials in contact with it. For example, it may cause deformation, discoloration, or chemical reactions of adjacent materials, thereby affecting the quality and performance of the entire product.