In spinning production, due to untimely cleaning, failure of cotton collecting device, sharp increase of broken ends, abnormal temperature and humidity of air conditioner or poor air flow, flying flowers increase and gather on the table, on the ground and in the air, and form flying flower defects when spinning.
In addition, improper cleaning operation of each process will also make the cleaning flower attached to the yarn body.
Measures: the cleaning cycle shall be specified according to the cleaning condition of the workshop, and strict inspection shall be arranged. The regular maintenance and inspection of all kinds of cotton collecting devices are the same as normal spinning equipment to avoid accidental failure. Do a good job of spinning speed inspection, ring, ring service cycle control, to avoid the phenomenon of sharp increase in broken ends.
Air conditioning personnel should strengthen patrol and control to keep the temperature and humidity stable and ensure the smooth air flow in the workshop. For the flying defects formed before the winding process, the yarn cleaner can be used to remove them, but the yarn cleaning process parameters should be adjusted and the relationship between cutting times and quality should be balanced. It is necessary to standardize the specific operation of yarn channel cleaning to prevent the cleaning flower from being attached to the yarn body in the cleaning process.
